05-12-2025, 09:27 PM
I replaced the Elfin EL41B with the Elfin EL11A-0.
It started working immediately.
I'm off to make a donation, thanks for your work.
I recommend adding "Elfin EL41B" to your documentation as a serial-to-wifi that will NOT work (keep in mind the EL41B worked with another project so it is most likely some incompatibility in your software and the EL41B).
EVERY setting in my setup was identical, the ONLY thing that I changed was the Elfin unit. I used the same RJ45 cable/power/etc. I didn't change any settings in your app, or on my network. I configured the EL11 identically to the EL41 (it has an identical web interface, with identical screens and settings, and the hardware itself looks nearly identical to an EL41).
It started working immediately.
I'm off to make a donation, thanks for your work.
I recommend adding "Elfin EL41B" to your documentation as a serial-to-wifi that will NOT work (keep in mind the EL41B worked with another project so it is most likely some incompatibility in your software and the EL41B).
EVERY setting in my setup was identical, the ONLY thing that I changed was the Elfin unit. I used the same RJ45 cable/power/etc. I didn't change any settings in your app, or on my network. I configured the EL11 identically to the EL41 (it has an identical web interface, with identical screens and settings, and the hardware itself looks nearly identical to an EL41).
![[-]](https://smartphoton.ch/forum/images/collapse.png "[-]")
